Overview

Compact flame detector for use with flame safeguard controls with ultraviolet amplifiers.

Features

• Use with Honeywell Flame Safeguard primary safety controls and burners requiring ultraviolet flame detection.
• C7027 mounts on a 1/2 in. sighting pipe by using an integral collar.
• Detectors can be wired in parallel for difficult sighting applications.
• C7027 seals against pressures up to 5 psi (34.5kPa) when correctly installed.
• Allows for blast tube mounting due to compact size.
• C7044 mounts with a two screw bracket.
• The C7044 UV sensor tube is enclosed in a stainless steel housing.
• C7044 has the capability of side or end viewing in flame monitoring applications.

Product Specifications

Application

Coal fired burners; Gas fired burners; Oil fired burners

Dimensions (in.)

1 1/16 in. diameter x 4 in. long

Dimensions (mm)

27 mm diameter x 102 mm long

Used With

Flame Amplifiers: R7249A, B, R7849A, B, R7749B, R7259, R7290

Comments

Detects ultraviolet radiation in flames

Mounting

Integral nut for 1/2 in. sighting pipe.

Approvals, Underwriters Laboratories Inc.

Listed: File No. MP268, Guide No. MCCZ

Approvals, Canadian Standards Association

Certified: Master Report LR95329-1

Electrical Connections

2 NEC Class 1 lead wires

Vibratio

0.5 G max

Approvals, Swiss RE

Acceptable

Approvals, Factory Mutual

Approved: Report No. 24181.03

Type

Ultraviolet, Minipeeper

Ambient Temperature Range (F)

-40 F to 215 F

Ambient Temperature Range (C)

-40 C to 102 C

Lead Length (in.)

96 in.

Lead Length (mm)

2438 mm