Electric Heating

The stainless steel tube and polyester screw cap DP electrical resistors range comes with brass coupling plug is used to heat all kinds of water, of whatever source and treatment.

• AX Series
  
• Installation depth: 63 mm
• Sampling cycle: 0,1 sec
• Multi-Input, Multi-Output
• Control output selection: reverse operatio/direct operatio

The stainless steel tube and polyester screw cap T electrical resistors range comes with brass coupling plug is used to heat all kinds of water, of whatever source and treatment.

• CSK 060 Range
• with PTC heating element and thermostat 
• Heating element: self-regulating ptc heating element
• Supply current: 120 - 240 Vac/dc. Max 265 V
• Surface temperature: <80 °C (According to VDE 0100), except over top grille
• Housing: Plastic according to UL94 V-0, black
• Connection: 4 poles, 2.5 mm² terminal
• Thermostat operating temperatures:
  CSF06001,  CSF06011, CSF06021
  Deconnection: 15 ± 5°C / Connection: 5 ± 5°C
  CSF06002,  CSF06012, CSF06022
  Deconnection: 25 ± 5°C / Connection: 15 ± 5°C

• Model EFR01246
• Adjustable between 40 - 90% RH
• Hysteresis (Humidity): 5% RH (±1 RH tolerance) at 25 °C
• Reaction time: Approx. 5 sec.
• Contact class: Inverter contact
• Connection capacity:
  240 Vac,8 (1.6) A
  120 Vac.8 (1.6) A
  24 V dc, 4 A
• Connection: 5 pole flanges, even max 0.5 Nm

• Range for oil
• With sheath for thermostat
• With brass 1"¼ BSP coupling plug
• Tubular element of stainless steel AISI 321, AISI 316L or nickel-plate copper of Ø8 mm, according models.
• BSP threaded plug of stamped brass -Protection hood IP-40
• 500 to 3500W

• Standard voltage: 150 - 250 Vac/dc. Max 265 V
• Heating element: PTC. Self regulating heating element
• Housing: Anodized aluminium
• Electrical class: I (earthed)
• Degree protection against moisture: IP44
• Connection: 3 pressure clamps for stranded/ rigid wire 0.5 – 2.5mm²

• Model EFR01246
• 65% RH
• Hysteresis (Humidity): 5% RH (±1 RH tolerance) at 25 °C
• Reaction time: Approx. 5 sec.
• Contact class: Inverter contact
• Connection capacity:
  240 Vac,8 (1.6) A
  120 Vac.8 (1.6) A
  24 V dc, 4 A
• Connection: 5 pole flanges, even max 0.5 Nm

• Models PQC
• Dimensions: 62,5 x 62,5 mm
  
• Iron-Chrome aluminium resistance wire
• Parallel translucent quartz tubes
• Highly reflective aluminised steel body that ensures low loss of radiation from back of the heater
• Supplied with two M5 x 30 screws which extend from the rear of the heater
• Supplied with two 100 mm ±10 mm ceramic beaded power leads
• Element dimensions and design can be adjusted to suit customer heating requirements
• Quartz elements can also be supplied with an in-built type K thermocouple
• Standard voltage ~230 V